Good day! Everyone!

Today, let’s learn something about the matching code and Operating Instructions of the 2.4g led controller :

 

The controller can be controlled simultaneously by four remote controls, firstly, you need to match the controller with the remote control. When matching code, you need to use “match” with “DIP”. In the working process of the controller, if the first dial is “on” (Figure 6), press the “Match” key, and then press the on/off key on the remote control, if the indicator “Signal” flashes, that means the address code is matched successfully, other three groups is the same. In the process of using, it can be used for group control, if all dials are “off”, it can only be used for global control.

fiture6 - LED Strip Lights Application Guide

  1. Operating Instructions

There are 64 touch keys (points) on the panel of touch remote control, the function of each key is as below:

  • on/off key: you can turn on/off controller output at any state;
  • group control, selecting all controllers that address code is matched with the remote control, then it can achieve overall controlof all controllers;
  • brightness increase key, overall brightness increase, every time you press this button, the brightness series add 1, total 10 levels;
  • brightness reduce key, overall brightness reduce, every time you press this button, the brightness series minus 1, total 10 levels;
  • group 1: selecting all controllers that address code is matched with the remote control and group address is 1, achieve overall control of all controllers;
  • group 2: selecting all controllers that address code is matched with the remote control and group address is 2, achieve overall control of all controllers;
  • group 3: selecting all controllers that address code is matched with the remote control and group address is 3, achieve overall control of all controllers;
  • group 4: selecting all controllers that address code is matched with the remote control and group address is 4, achieve overall control of all controllers;
  • brightness adjustment ring, it is used for adjusting brightness of the single color led strip.

 

Until now, maybe you will course about its Power supply management and Typical Application, Do not worries, let’s continue tomorrow.