Specification

This type of LED Strip Light has a breakpoint resume function.

1) This product is a dream-color single-point externally controlled flexible light strip, and 1 led is a pixel.

2) With high brightness, it can achieve the effects of full-color flowing water, meteor tail-chasing, chasing, advertising words, animation, video, scanning, etc.

3) Widely used in hotels, KTV, and other interior decoration.

4) Up to 5 meters can be connected in series, super series connection is strictly prohibited.

5) The thickness of the power cord should be determined according to the actual possible maximum current, product power, wiring length (recommended no more than 5 meters), and the voltage drop of the low-voltage transmission line.

6) Since it has a spare signal line, this light strip has the function of continuous transmission. That is to say, after a group of LEDs is broken, it will not affect the light strip behind the bad LED, and the light strip behind can continue to work.

Product parameters

Product nameWS2812 DC5V 60LEDs/m Addressable RGB LED Strip Lights
Part numberDR-2812FX60-5RGB
Power(W)16W/M
Input voltageDC5V
Led quantity60pcs/M
IC modelWS2812
IC typeBuilt-in type
IC quantity60pcs/m
Working current0.053A/segment 3.2A/m
LED chipSMD5050
LED colorRGB
Circuit board typedouble layer FPCB (flexible soft board)
Packagingaluminum foil bag anti-static packaging
Weight per plate240g (drop glue) 100g (bare board) 200g (sleeve)
Working temperature-40℃ ~ 60℃
Storage temperature-50℃ ~ 80℃
Greyscale256
Bits/color8-bits/color;24bit for RGB
PCB width10mm
Working hours50000 hours
Length5000mm (16.4ft) per roll
Standard connector4PIN terminal to connector
Waterproof ratingsIP20 / IP67
Tape3M 300LSE tape on the back
Packing5m/roll
CertificationCE, ROHS
Warranty2 years

Dimension

WS2812 5V LED strip light dimension - WS2812 LED Strip Series

Control principle:

One IC controls 1 led to form a loop (a group), the controller controls the circuit in the FPCB through the control IC, so as to control the LED light strip to change different effects.

Such as flickering, chasing, jumping, clockwise Horse racing, anti-clockwise horse racing, monochrome horse racing, color-changing horse racing, single chase from start to finish, flowing water, simulated lightning, etc.

The changing effects of this light bar are not limited to the 94 built-in effects of the controller and can be customized according to customer needs writing.

Can be displayed in the form of a screen, text, letters, pictures, animation, and so on.

Features

1. Environmental protection and safety: high-quality high-brightness SMD 5050 LED is used. It has the characteristics of low power consumption, low heat generation, no glare, and impact resistance. Low voltage DC12V power supply, high safety, and reliability.

2. The colors are rich and varied and can be adjusted arbitrarily through the controller according to customer needs.

3. Long lifespan: The average lifespan is 50,000 hours.

4. Convenient and free cutting and welding: Each group of LEDs can form a loop, which can be arbitrarily cut and welded along the tangent above to meet the needs of various light bar lengths required by customers.

5. Soft: The soft FPCB board is used as the substrate, which can be docked, bent, cut, and fixed on the concave and convex surface at will.

6. Light and thin: suitable for installation in narrow spaces.

How to connect and control

The WS2812 led strip has 4 wires for sending data – one V+ pin, one GND pin, one data pin, and one backup pin. You only need 3 pins to control the strip.

The spare data cable is only needed after the LED strip light has a dead light or the data cable is damaged.

Because the data is separated, you can use any processor speed or type to control these strips.

By varying the level of red, green, and blue (RGB) per pixel point, many color combinations can be made, you can use any processor speed or type to control these strips, you can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any ‘raw’ microcontrollers/microprocessors to control the strip.

This strip comes as a single full meter with a 4-pin JST SM connector on each end. Every 1 LED segment can be cut. Solder to the 0.1″ copper pads and you’re good to go.

You can also connect strips together to make them longer.

WS2812 Addressable LED Strip Application Range:

1. Polygonal walls and water drop ceilings in hotels/nightclubs/KTV/e-sports halls/Internet cafes and other places are decorated to enhance the atmosphere;

2. Buildings, advertising walls, signboards, festivals, and other decorative fields have a beautifying/brightening effect on the city;

3. Home decoration lighting (stairs, door frames, bar counters, wine cabinets, wardrobes, TV cabinets, DIY home decoration…);

4. Car beauty (body, bottom…);

5. The outlines of iconic buildings, buildings, pavilions, bridges, parks, etc., are outlined, and the lighting effect is embellished.

6. Lighting signals (such as various luminous indicators)

7. Edge-Lighting transparent or diffused materials

8. Support underwater lighting projects

9. Canopy and bridge arched edges/amusement parks/theaters/airplane cockpit lighting

We are a professional lighting system company, you can tell us your lighting project requirements, we will recommend the most reasonable lighting solutions for you. If you need a customized lighting scheme, please feel free to contact me.

WS2812 LED magic light strip installation method and precautions:

1. Indoor installation: WS2812 LED light strips are relatively simple to install indoors because they do not have to withstand wind and rain.

When installing, you can directly tear off the sticker on the surface of the 3M double-sided tape on the back of the light bar, and then fix the light bar in the place to be installed and press it flat.

If you encounter a corner or the light strip is too long or too short, the LED light strip can be arbitrarily cut or welded at each set of tangent lines marked with scissors and used alone.

2. Outdoor installation: Because outdoor installation will be exposed to wind and rain, it cannot be fixed with 3M glue. Therefore, outdoor installation is often fixed with card slots.

Where it needs to be cut and connected, the method is the same as that of indoor installation, but additional equipment is required.

Waterproof glue to consolidate the waterproof effect of the connection point.

3. Power connection method: The general voltage of the WS2812 LED strip is DC5V, so it needs to use a switching power supply to supply power. The size of the power supply is determined according to the power and connection length of the LED strip.

4. Controller connection method: WS2812 LED strip light needs to use controllers to achieve changing effects, and the control distance of each controller is different.

Generally speaking, the control distance of a simple controller is 10 to 15 meters, the control distance of the remote controller is 15 to 20 meters, and the longest distance can be controlled to 30 meters.

If the WS2812 LED strip has a long connection distance and the controller cannot control that long strip, then a power amplifier is required to tap.

WS2812 LED Strip Light warranty and description:

1. The warranty period of this product is 2 years; the warranty period includes replacement and repair but does not include damage caused by man-made damage or overloaded work.

2. It can truly achieve 3% light decay within 1000 hours, and the service life is 80,000-100,000 hours. Please compare the quality of similar products in the market.

3. It can be made into any length and quantity of lamp beads according to customer requirements, welcome to inquire!

4. If you need to order, you need to pay a 30% deposit in advance, and the balance should be paid before delivery.