Specification

Wide compatibility:

Can be controlled by Arduino, Raspberry Pi, Fadecandy, K1000C, SP105E, SP107E, SP110E, etc.

12V WS2815 LED Strip:

WS2815 LED strip is an upgraded version of the 5V WS2813 LED strip. For the 5M LED strip, even if all the LEDs are turned on full white, the 12V version has no voltage drop. You don’t need to inject power as frequently as the 5V version.

Individually addressable:

Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display.

Dual-signal wires:

WS2815 LED strip is Similar to the version of the 5V WS2813 LED strip, Designed with one data wire and one backup data wire. Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work.

Product parameters

Product nameWS2815 DC12V 144LEDs/m Addressable RGB LED Strip Lights
Part numberDR-WS2815FX144-12V
Power(W)34.56W/M
Input voltageDC12V
Led quantity144pcs/M
IC modelWS2815
IC typeBuilt-in type
IC quantity144pcs/m
Working current0.02A/segment 2.88A/m
LED chipSMD5050
LED colorRGB
Circuit board typedouble layer FPCB (flexible soft board)
Packagingaluminum foil bag anti-static packaging
Weight per plate240g (drop glue) 100g (bare board) 200g (sleeve)
Working temperature-40℃ ~ 60℃
Storage temperature-50℃ ~ 80℃
Greyscale256
Bits/color8-bits/color;24bit for RGB
PCB width12mm
Working hours50000 hours
Length5000mm (16.4ft) per roll
Standard connector4PIN terminal to connector
Waterproof ratingsIP20 / IP67
Tape3M 300LSE tape on the back
Packing5m/roll
CertificationCE, ROHS
Warranty2 years

The difference between the WS2815 and WS2813:

1. LED Chip type:

WS2815——WS2815 IC
WS2813——WS2813 IC

2. The problem with voltage drop:

WS2815 No voltage drop
WS2813 need to add DC5V voltage every 5m

3. Normal operating voltage:

WS2813 Working with DC5V
WS2815 Working with DC12V

Feature:

LED Light Source: WS2815LED
( Same Protocol as WS2811s But With Dual-Signal Wires, So Can Be Controlled by the Same WS2811/ws2812 Controllers)
Input Voltage: DC12V WS2815.
LED: Each LED is separately controlled
IC: (1 IC drives 1 led chip)
Cuttable: Every LED is cuttable
Grey Scale: 256
Bits/Color: 8-Bits/Color
Colors: Full-color RGB, dream color changing
FPC Color: Black/ White
Pixels: 30Leds/60Leds/144Leds/m
Working Temperature: -40 – 70 °C
Storage Temperature: -50 – 80 °C
Source Life: 50,000 hours
Connector: 4PIN connector terminal pair (Red: 12V power, Green: Dateline, Blue: standby dateline, Black: GND)